wear resistance
英 [weə(r) rɪˈzɪstəns]
美 [wer rɪˈzɪstəns]
耐磨性，耐磨度
双语例句
- Materials selection: requires high temperature strength, toughness, hardness, and wear resistance.
钢材选择：需兼具高温强度，高韧度，高温硬度和抗磨损； - The surface hardness and wear resistance of aluminum alloy are both improved by means of scanning electron beam.
电子束表面处理可以提高铝合金材料的表面硬度、增加耐磨性。 - The results indicate that the wear resistance of the composites is superior to that of the basis alloy.
结果表明，含硅高铝锌基复合材料的耐磨损性能优于基体合金； - Milling, planing, impact and percussion. High toughness for medium wear resistance. Well suitable for brazing.
铣削、刨平、挤压和冲击操作。在中等磨损条件下具有高的韧性。很适合硬焊。 - When the hardness is higher than734HV, the wear resistance is very sensitive to the hardness.
当材料的表面硬度高于734HV时，其耐磨性对硬度变化的敏感性很大。 - The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.
切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。 - The mechanism of wear resistance improvement after oxidation is analyzed in detail.
分析了合金氧化后耐磨损性能的提高机制。 - Work rolls used in cold rolling mills must have outstanding wear resistance and very little plastic deformation.
冷轧轧机上的工作辊必须有很高的耐磨性和较低的塑性。 - For high strain of toughness and good wear resistance.
在高应力条件下具有好的韧性和高的耐磨性。 - It improves the rolling contact fatigue behaviour and the wear resistance, especially under mixed friction conditions.
它提高了滚动接触疲劳的行为和特别是在混合摩擦条件下的耐磨性。 - Good wear resistance can be used as polishing materials.
耐磨性较好可作为抛磨光的材料。 - High toughness for medium wear resistance.
在中等磨损条件下具有高的韧性。 - Easy processing, good wear resistance, good plasticity, and processing for copper bearing.
易加工，耐磨性好，塑性好，适用于铜轴瓦加工等。 - Gear teeth are nitrided for exceptional hardness and improved wear resistance even at high speed.
轮齿经过渗氮处理，具有极高的硬度，并且即使在高速也能改善耐磨性。 - The hardness, wear resistance and impact toughness of the alloy were tested.
测试了试样的硬度、磨损性和冲击韧性。 - The corrosion wear resistance of low chromium white cast iron increases when the silicon content increases in it.
而增加含硅量后的低铬白口铸铁的腐蚀磨损耐磨性将比普通白口铸铁的高。 - The durability of water-lubricated guiding bearing for a pump depended on the wear resistance of bearing bush.
水泵水润滑导轴承的耐久性主要取决于轴瓦材料的耐磨性。 - The powder product wear resistance, corrosion resistance, good sliding friction.
该粉末产品耐磨性，耐蚀，耐滑动摩擦性好。 - With features of high endurance of hot and hardness, also excellent in toughness, thermal fatigue, wear resistance with normal temperature.
有较高的热强度和硬度；在中温条件下有很好的韧性、热疲劳性和一定的耐磨性。 - This standard feature provides excellent wear resistance.
本标准功能提供了极好的耐磨性。 - Output Shaft: Hardened electroless nickel, corrosion and wear resistance, oversize diameter for increased strength and rigidity.
输出轴：硬齿面化学镀镍，耐腐蚀性和耐磨性，增加强度和刚度超大直径。 - The influences of cryogenic treatments on the microstructure, material performances and the impact wear resistance of the superhigh manganese steel are studied.
主要研究了深冷处理对超高锰钢组织、性能及耐磨性的影响。 - Ceramic inserts are made of sintered aluminium oxide and offer exceptional hot hardness and wear resistance.
陶瓷的插入物由泉华组成铝氧化物和提议特别的热坚硬和穿着抵抗。 - High wear resistance and edge durability and good toughness properties.
具有高的耐磨性、切面稳定性和好的韧性。 - The study was carried out to investigate the effect of alloying elements on wear resistance of heat-resistant ductile iron.
研究了合金元素对耐热球墨铸铁耐磨性能的影响。 - A strong wear resistance and whitening effect.
具有较强的耐磨性和增白作用。 - Matching the above-mentioned materials for wear resistance were tested using the friction pair formed by the ring and block.
将上述材料分别配对进行耐磨性试验，试验用的摩擦副由环和块组成。 - The influence of fracture mode and wear surface pullout on wear resistance was studied.
研究了断裂方式对磨损表面剥落和耐磨性的影响。 - The hardness, brittleness and wear resistance of Re Chrome boronized layer and boronized layer are studied.
通过对钢单渗硼层和稀土硼铬共渗层的硬度、脆性和磨损特性进行研究。 - The wear resistance of surfacing layer was investigated by the design of flux-cored wires and TIG welding method.
通过药芯焊丝配方的设计，结合TIG焊接方法，对堆焊层的耐磨性进行了研究。